Posted by Vaughn [108.79.205.118] on Saturday, November 23, 2013 at 12:59:06 :
In Reply to: Maybe Steve K can chime in posted by Nick [99.100.212.49] on Saturday, November 23, 2013 at 00:09:35 :
Nick, try and find a part number on the housing. The Technical Manual (TM 9-1808C) for 41-71 power train interchanges says the 1/2 ton housing is smaller and does not directly interchange. Before you go further, you need to identify the housing. With the info. I have it's looking like a 1/2 ton. Measure from one brake backing plate flange across to the opposite side. Measure the PW and compare. If it's not the same width, I would not use.