Posted by clueless [201.205.51.181] on Wednesday, November 20, 2013 at 14:23:34 :
on the wc62 using the stock wm wdx ext., all front holes and bumper holes match up but there is not a hole in the frame where the back winch mount bolts to the frame so will have to drill that one
and the rear of the winch frame hits the bottom of the grill so won t go all the way back to mount-so i took off the grill and got it mount it just barely hits it so will have to raise the front clip which is sitting on some squished pcs of tire between the frame bracket and the radiator frame
can t remember if this uses a rubber mount of any kind or if it just sits on the frame bracket
i would like to use a vulcanized mounting so that will raise it plenty to clear the grill
how did that come from the factory
Follow Ups: