Posted by Kaegi [98.247.164.246] on Sunday, November 03, 2013 at 14:44:15 :
In Reply to: Re: another wheel cylinder question posted by John S [108.3.89.72] on Sunday, November 03, 2013 at 13:50:13 :
the resleeving outfits bore it out. press in a sleeve of brass or stainless, then bore to size and use stock size pistons and cups. less expensive sometimes to just buy new cylinders. maybe look for some more cast iron pistons to swap in. new whl cyls are only 20 to 30 a piece. sleeving much more.