Posted by Daryl in Oz [210.50.251.120] on Friday, October 25, 2013 at 19:49:36 :
In Reply to: Re: back to sq. 1---i was thinkink about raising posted by Tim Norris [24.147.199.135] on Friday, October 25, 2013 at 17:34:16 :
I used the hanging pedals from an Australian 300 series, bolted right in with very few mods. The under hood section allows you to sandwich the firewall between the 2 pieces and mount the m/c's to it. Difficult converting the original clutch mechanism to hydraulic when dealing with RHD as the lever system is different to LHD. The later PW's and M601's came with a remote booster mounted under the cabin right side on brackets bolted inside the frame rail. Means you can run a physically smaller m/c (no booster attached) for extra under hood room. Hopefully the picture works.