Posted by John Diehl on Thursday, June 07, 2001 at 11:30PM :
In Reply to: Re: Paint Code posted by John Diehl on Thursday, June 07, 2001 at 11:27PM :
following is a quote from the same site:
Engine Paint Supplier Options
Visitor George Risley, restoring his D24, provided some additional information about the different paint options for painting the engine block. He tested the Hirsch and POR 15 aluminum paints for color match to the original mopar silver. The Hircsh HI-Temp exhaust was very close, a litttle brighter than original. For block, head and other lower temperature areas the POR15 Engine Enamal (600 degree) was the best match, with a slight gray cast. The Hirsch 600 degree and other local rattle cans (Plastic Cote, Tempo, etc.) were all too gray. The Hirsch has a glossy smooth finish while the POR15 has a satin sheen look (600 degree paints).
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |