Posted by don in nh [96.61.72.163] on Sunday, September 22, 2013 at 22:50:21 :
In Reply to: Re: Carter E7T2 idle screw adjustment posted by Keith in Washington [24.41.55.59] on Sunday, September 22, 2013 at 18:51:08 :
Read your other post. If I have to go back in there I will check. The carb was a mess, no real gaskets (red RTV or similar), no leather left on the pump. I cleaned it up and replaced the basics but I did not replace the jets. I assumed that they were correct, but I did not measure. Hoping for that vac problem.
Thanks,
don