Posted by don [96.61.72.163] on Sunday, September 22, 2013 at 22:38:23 :
In Reply to: Re: Carter E7T2 idle screw adjustment posted by wayneh [68.32.120.247] on Sunday, September 22, 2013 at 20:17:00 :
I would say that it doesn't transition too well from idle to load. It will gasp/hesitate if I transition too quickly. In limited testing (low speed, 1st gear) it does accelerate and run.
I did turn the idle screw all the way down and this did seem to improve the above problem (along with major backfires), but I was unable to get it to impact the idle speed.
I will check for leaks. It does seem to idle pretty high, I don't have a tach but it didn't seem to be in the mid to low 100's.
Thanks,
don
don