Posted by clueless [201.237.45.42] on Tuesday, September 10, 2013 at 16:50:34 :
In Reply to: Re: me posted by Sterling Luttrell [99.58.180.94] on Tuesday, September 10, 2013 at 15:52:13 :
they made the mount out of half in. by one and a half in. stock---oops forgot to measure the length but whatever you feel good with the bolt holes drilled into 2 in. apart
and actually mine they used the stock bolt to bolt in the rear hole to the stock 230 hole to line things up with and lined up the motor mount bracket to front hole and welded the new mount to the crossmember and took the bolt out of the rear hole and locked her down thru the front hole