Posted by Desoto61 [138.162.0.45] on Tuesday, August 27, 2013 at 12:07:44 :
In Reply to: Another LU2 paper gasket question posted by Joe Cimoch [68.186.242.95] on Monday, August 26, 2013 at 20:50:39 :
And remember that if you use any sealant on them it will affect the final thickness, it's minimal but so are your tolerances.
I set it up dry and then put the sealer on for the final assembly and naturally ended up having to remove a gasket to get the thickness back down. Luckily I used an aenerobic sealant so it doesn't set up until everything is sealed which gives extra time to correct.