Posted by Mhettinga in NM [70.57.251.208] on Saturday, August 10, 2013 at 00:44:18 :
In Reply to: Update! posted by Sterling from TX [99.58.180.94] on Friday, August 09, 2013 at 10:47:29 :
I was having my old mount re vulcanized as I could not find anyone that had these. The 251 mount is a bit over an inch thick while the 230 are just under 3/4". The bolt spacing is different on these as well.
After I sent my mount off to get done another board member here sent me a serviceable unit. I have not given the go ahead for the one to get done, but the costs associated will be at or just over a hundred bucks.
You can email me about this sterling if you want.