Posted by gmharris [71.105.44.68] on Thursday, August 01, 2013 at 18:16:47 :
In Reply to: Re: Absolutely! posted by Kaegi [98.247.164.246] on Thursday, August 01, 2013 at 12:45:02 :
Since you've already engaged a machine shop for the manifold, just take the bearings and the housings down and have the machine shop fit them. End of story.
Sounds like you already dinged up one set of bearings. I'd be tempted to run a 1" drill through them and see how they fit.
I hope you are not pounding on the bearings with a hammer.