Posted by dana in ma [70.192.6.13] on Thursday, June 13, 2013 at 14:35:14 :
In Reply to: Horn wire for wm300 posted by Dodgetuff [98.198.236.202] on Wednesday, June 12, 2013 at 12:56:56 :
If you go to the home page and click on Power wagon Photos and look for pic #128 and pic 130 this is what I did with my horn contact. I used a piece of copper printed circuit board made into a disc slid over the steering shaft and siliconed to secure as to not ground the copper disc. Then secure the horn wire to the disc. Then a fabricated bent brass contactor that touches the disc makes the contact when the shaft spins around. Works great.
Follow Ups: