Re: oops---------sore subject--if that were true

Posted by clueless [201.237.45.42] on Saturday, May 25, 2013 at 14:36:11 :

In Reply to: Re: oops---------sore subject- posted by Kaegi [24.16.253.154] on Saturday, May 25, 2013 at 13:49:31 :

and it may be

then you could use half ton or early 3/4 ton axle which has the same spline but is way thinner and i sure would not want to use one of those

spline od------ 1 3/8---------all

front inner wc62 shaft od 1 5/16

front outer
and rear shaft od late 3/4
wdx etc. 1 3/16

rear 1/2 ton or early 3/4
or which ever ran those super
thin ones---have not measured
but probably 1 1/16

This board is powered by the Mr. Fong Device from Cyberarmy.com