Posted by JohnD [71.246.87.36] on Thursday, May 23, 2013 at 18:42:48 :
In Reply to: Re: Manifold Repair posted by Gary Troxel [24.113.13.141] on Thursday, May 23, 2013 at 11:56:09 :
Grind a vee along the crack, heat the area with a torch till hot, then arc weld with nickel rod. Use about 3/4" beads and move around rather than one continuos bead. Connect all the short beads and allow it to cool slowly.
Me? I'd spend the $100