Posted by junkyardog [72.64.2.206] on Thursday, May 23, 2013 at 02:24:01 :
In Reply to: Manifold Repair posted by gmharris [71.105.40.248] on Thursday, May 23, 2013 at 00:28:49 :
i have seen it done. the trick is to heat it before you braze it in a oven or something. then it has to cool real real slow. make sure you clean it well. this was done on an old truck so the cast was thicker. weather that was difference i dont know.most of the time it will crack beside where you brazed it. good luck