Posted by JET [75.53.128.56] on Thursday, May 02, 2013 at 19:39:35 :
In Reply to: Not OT: M37 won't start posted by Sherman in Idaho [24.32.202.166] on Thursday, May 02, 2013 at 12:06:35 :
My '50 FFPW did the same thing to me, and it turned out that the points needed to be gauged again after I cleaned the dist. hot points, and rotor cap. Check the clearance on the points,after you have emery clothed them....just food for thought...good luck. JET