Posted by Terry [65.95.4.163] on Saturday, April 27, 2013 at 08:21:42 :
In Reply to: Re: engine stumbles at speed posted by Daryl in Oz [116.240.181.74] on Friday, April 26, 2013 at 20:54:19 :
The float is set to 5/64" from the top of the bowl right now. I can't go any higher because the float will hit the underside of the top cover and will not seal off the needle when needed. The seat and needle are new and is of the rubber tipped kind. Pulling out the choke only helps a small amount as the engine still bucks at the same speed areas. Terry