stubborn pistons

Posted by clueless [186.15.41.109] on Saturday, April 20, 2013 at 21:18:13 :

In Reply to: More Thoughts On Wheels Cylinders: posted by gmharris [71.105.35.169] on Saturday, April 20, 2013 at 17:47:27 :

hope i did not screw up as i put em in a vise and used a costan rican coins and a socket and pushed them in a little and clean the fresh area and if they would move

no luck

then i left em in the vise and did like you said and put air to them--50 lbs with compressor hose clamped on the bleeder valve and the air fitting--need to tighten the clamps more as it leaked air but not much

i also filled the area i pushed in to the top of the cylinder in brake fluid and let em sit and then tried to blow

still no luck

they are the originals as they have the ole style bleeder screws

think i will see about getting them sleeved here

Follow Ups:

• Re: stubborn pistons - gmharris 22:57:55 04/20/2013
  • Re: stubborn pistons - Russ/Wyo 00:05:27 04/21/2013
    • Re: stubborn pistons - Marty 03:22:15 04/21/2013
      • Re: stubborn pistons - Russ/Wyo 23:09:02 04/22/2013
    • Good One ntx - gmharris 00:19:41 04/21/2013

Post a Followup