Posted by Daryl in Oz [211.27.80.84] on Wednesday, April 17, 2013 at 19:10:34 :
In Reply to: Re: 265 crank 236 rods posted by Paul D Hoffmeyer [75.17.203.17] on Wednesday, April 17, 2013 at 14:33:22 :
You need a piston with a shorter crown, so probably a new set of pistons that have the right height - if you are going that far you could look at the 225 slant pistons with the offset pin, that way you can put the off-set in the direction of rotation for better stability on the power stroke at high rpm's.
Follow Ups: