thought maybe

Posted by clueless [201.202.22.114] on Sunday, April 14, 2013 at 22:19:48 :

In Reply to: Re: desoto 61---prty pls posted by Desoto61 [68.10.214.249] on Sunday, April 14, 2013 at 21:49:09 :

you had not installed yet and were trying to solve the spline problem before mounting

if you look at the pic of the box i posted it would have to hang from a bracket above the box

and when you pivet the pitman arm to the front
it reverses the pitman arm and moves the spline end it of the arm about plus or minus an inch further out from the frame than the stock position which also lines up good with the knuckle arm and it will still go on to the spline shaft of the box the way it is supposed to cuz it is now outside the frame facing the frame not poking thru it as in the stock position

even looks like i can mount using a bracket from the bumper reinforcement bracket

i have moved the pitman arm to the front and all the above looks like it works in my mind but i do not have a box yet to verify

thanks for your thoughts

did you get the arm to go on any further

Follow Ups:

• Oh, hadn't thought of that. - Desoto61 07:41:36 04/15/2013
  • Re: Oh, hadn't thought of that. - clueless 11:08:43 04/15/2013
    • not to mention---------anybody else - clueless 11:17:34 04/15/2013
      • shucks no takers yet anyway! - clueless 15:19:28 04/15/2013
        • Re: shucks no takers yet anyway! - Desoto61 22:18:31 04/15/2013
          • don t stop now - clueless 17:17:33 04/16/2013

Post a Followup