Posted by clueless [201.202.22.114] on Thursday, April 11, 2013 at 20:55:08 :
In Reply to: Re: ps posted by Terry [65.95.6.182] on Thursday, April 11, 2013 at 15:34:59 :
i need a narrow box like the ones in my pic
which one does ray use it might work but standard rotation
i am going to check his website
think i saw 37 spline on the rock auto list
yes i see they are both tapered but i am putting it on the shaft the same way cuz the box is outside the frame with the spline entry facing the frame so that the pitman arm is now 2 in. plus off the frame so it still goes on the spline the same way as before
i just swiveled it around to the front still mounted on the knuckle arm so everything works the same only to the front only diff is the hole for the ball to enter is now facing in which now matches up with the reversed pitman arm
another great candidate to mount it on is the wc front cab mount bracket the thickness is a little ify tho, could fabricate something similar to it or the rad. support bracket which also appears would work well and give it the factory
Follow Ups: