Posted by Mike Stone in Idaho [71.39.211.42] on Sunday, March 31, 2013 at 09:56:14 :
In Reply to: Head gasket or more? posted by Sterling from Texas [99.98.76.231] on Sunday, March 31, 2013 at 03:50:34 :
heads warp
blocks crack
who installed the head gasket?
were the bolt holes cleaned with a bottom tap
so they would seat correctly?
when you inspect the gasket you should be able to determine where the leak came from
good luck
easy to check your temp gauge
remove sender from head, put in boiling water