Posted by bobyepsr [174.250.1.4] on Sunday, March 17, 2013 at 20:34:43 :
In Reply to: Re: Polishing cowl light trim rings posted by Gary Troxel [50.47.168.171] on Sunday, March 17, 2013 at 19:00:13 :
Thanks, That would explain it. I just laid them out flat on the table and put a straight edge across them. That ring is about an 1/8th" shorter than the others. The marks I was trying to remove seemed to be from when the ring was stamped. The others don't have them. Jim
Follow Ups: