Posted by Vaughn on Monday, April 23, 2001 at 9:52PM :
In Reply to: PTO swap posted by Don Scott on Monday, April 23, 2001 at 10:39AM :
Your 3/4 WC tranny should be able to except it as long as the large cluster gear's teeth are in line with PTO's gear. If you have the after-type tranny (drain plug parallel to tranny bottom) in your 52, then your going to need a spacer between the PTO and tranny. Going from the later to the older PW tranny in doing PTO swaps requires a 1/4 spacer. You'll have to figure out what your spacer needs will be.
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |