|
|
Posted by clueless [201.202.24.76] on Monday, December 24, 2012 at 16:30:03 :
the floor bds. are missing so the brake pedal get stuck on the cab floor sheetmetal when you push it all the way in and you just push the sheet metal out of the way with your foot and the pedal springs back with good spring pressure
so i just pumped em up wedge a stick between the pedal and the seat frame with the pressure on
go back loosen the bleed screw leave it open go back and pust the pedal all the way to the floor where it gets stuck
go back and tighten the screw and repeat or move on depending on whether i get good pedal or not
seemed to work
you could always use another stick or some such to wedge the pedal to the floor
Follow Ups: