Posted by clueless [201.202.29.210] on Saturday, December 22, 2012 at 12:29:33 :
loosened the brass fitting bolt on the wc on the left rear to see if the fluid was getting there and some came out but it was from the cylinder as upon taking the bolt all the way out low and behold a screw in the opening blocking the flow
apparenly all the cylinders except the rear right are blocked off this way as they bleed zero fluid
who needs more than one wheel braking on a 6x6 when driving around watering a ranch road at 5mph twice a year for 30 yrs---lolol
the front cylinders are replacements and wrong as you cannot put the lines and fitting bolt in without rubbing elbows with the bolts on the knucle caps and they have modern bleeder screws
the rears apparently are original as they have the ole styly(maybe military style)bleeder screws
well at least i got one brake and the emergency to put around on when and if i manage to start her up in the next few days
later i well see if the cylinders are good nuff to take new cups
if they are i would put the after market ones in the front in the rear and the rear in the front that is if they will work.
are not they all the same as far as left and right go or are the fronts different from the factory
Follow Ups: