|
|
Posted by Chris Case [75.36.38.121] on Sunday, November 18, 2012 at 14:46:06 :
In Reply to: Stant 10281, modern production posted by Chris Case [75.36.38.121] on Sunday, November 18, 2012 at 14:32:52 :
They never were common, but there used to be a sheet brass spacer. Like a hollow ring of brass. ( I wonder if there isn't a carb float that works?)
I make my own out of 1/2" thick aluminum. Plus a cork or rubber gasket goes in first. I saw the OD as an octagon, there needs to be a fluid path out the overflow port. Wood cutting band saws work pretty good on aluminum.