|
|
Posted by Clint Dixon [74.206.63.42] on Thursday, November 15, 2012 at 21:52:51 :
In Reply to: fuel pump heat shield posted by Jerry in Idaho [69.59.83.175] on Thursday, November 15, 2012 at 13:20:28 :
That is actually not correct for a WDX. The WDX, B1PW and B2PW model trucks had an air dome on the top of the fuel pump that had to stick up through the heat shield through an additional hole that measured about 3/4-inch in diameter. The old pump is actually listed as an "up to type", and the newer pump (without the air dome) was listed as an "after type". The shield in the auction looks like those used on B3PW model and later trucks.
Junior
Follow Ups: