|
|
Posted by John [71.222.173.205] on Wednesday, October 10, 2012 at 22:06:31 :
In Reply to: Poly 318 - pushrods for hydraulic lifters posted by Joe Cimoch [68.186.242.95] on Wednesday, October 10, 2012 at 21:07:31 :
When I rebuilt my 318-3 (hydraulic lifters), I ordered a rebuild kit from Kanter. The pushrods were slightly too long. However, Kanter assured me that they were the correct pushrods. I ended up ordering a set of new pushrods from Neilson Cams in Utah. They were expensive, but they fit.
Follow Ups: