Posted by Jim in Ok on Tuesday, March 27, 2001 at 0:35AM :
In Reply to: Need some advice on ... posted by Allen Patnode on Monday, March 26, 2001 at 7:52PM :
If you can get the wheel off,you might try blocking a chop-saw up under the hub.Make your cut as close to the hub as possible.Your going to trash the axle shaft but possibly save the rest.Also need to be pretty solid with the chop-saw as you won't be able to use the clamp on the saw itself. Just a thought......Jim
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |