|
|
Posted by Gordon [212.183.128.29] on Sunday, August 05, 2012 at 09:47:08 :
Afternoon all, been fighting to get back in - will have to let Joe know the home computer IP's again so he can clear them.
Anyway, got a manifold primer question. I'm buying the Dole Valve hand pump primer setup normally found on Weasel and DUKW, but also an option on Dodges. I need to fit it to the T214 engine in the T-36 Snow Tractor ( still with me ? - good )
I've got all the kit agreed, but don't have any idea how to fit it to the T214 inlet manifold. One the Weasel there are three obvious points to fit the injector elbows / tees, but there is only one threaded connection on the T214 manifold.
It occurred to me that someone here might have a PW or an M37 with the artic primer setup fitted to the manifold. If so, could you e-mail me an image to << gordon(at)dodge.org.uk >> please as I said, my access here is a bit patchy.
The T-36 page isn't really up to date as I'm still pulling the machine to bits, but I've attached a link which isn't that old.
The other Dodges say hello, but they haven't done much recently.
Gordon
central Scotland
Follow Ups: