|
|
Posted by Kaegi [24.16.253.154] on Monday, June 11, 2012 at 18:53:49 :
In Reply to: Engine is Free... posted by CSCameron [68.228.198.56] on Monday, June 11, 2012 at 17:09:34 :
I would get it spinning wiht the starter with no plugs installed, spin unitll you have oil prssure and you have pumped most of the mystery oil out of the cylinders, then run a compression check on each hole. if 1 or more have zero compression then you have valves stuck in the open position. then head must come off to remedy that problem. good luck. I will hope for compression on 6 holes.
Follow Ups: