|
|
Posted by Desoto61 [98.166.17.169] on Sunday, June 10, 2012 at 21:24:20 :
In Reply to: Reusing Diff Ring gear bolts? posted by Taylor in Indiana [184.1.125.121] on Sunday, June 10, 2012 at 15:47:40 :
I replaced them with 3/8-24 grade 8 bolts. You have to shave one of the flats slightly to make it fit the ring gear, but apparently the stock bolts were ungraded.
Charles Talbert was the one recommending the upgrade. Also installed 2-way lock nuts and used red lock-tite on them since you can't use the lock tabs with the ARBs.
You can see the pics in the link below.