|
|
Posted by clueless [201.197.162.212] on Friday, May 04, 2012 at 10:46:54 :
no wonder the brake pedal went to the floor
the wheel cylinger bolt that feeds the cylinder from the brake line is missing on the front right wheel cylinder
so i stole one from a parts truck but been awhile, i guess you have to dissasemble the brakes and pull the cylinder to put the bolt back in as the upper bearing cap on the knucle is in the way or can i just remove the bearing cap put the bolt back in and torque down the cap again
i was looking at this late last night and will look again, would be nice if the bolt would just screw back in
then again it has been off so long that the threaded hole is full of gunk so guess i am going to have to dissasemble the brakes, which i guess i will have to do all the way around sooner or later
kinda wanted to just bleed the system and see what i got, the previous owner said he did a brake job----------lol
Follow Ups: