|
|
Posted by Desoto61 [98.166.17.169] on Monday, April 30, 2012 at 20:28:05 :
In Reply to: Re: Pinion setup problem posted by Bob in Illinois [76.16.15.87] on Monday, April 30, 2012 at 20:13:30 :
Paperwork that came with the ring an pinion set says 15 in. lbs for used bearings and 20 for new bearings.
I'm getting like 6 in. lbs. with my thinnest shim from the kit, which is 0.178". Oringinal shim set was 0.187"