|
|
Posted by Terry [74.15.32.146] on Friday, April 20, 2012 at 15:50:39 :
In Reply to: rear pinion seal...again posted by JET [75.53.137.223] on Friday, April 20, 2012 at 13:33:00 :
why remove the whole seal assembly when you can just pull out the inner felt/seal parts out. Slightly beburr the three crimp marks and install a 18555 seal into this bore. It works great and is easy to replace in the future. Make sure to use a speedi sleeve to repair your grooved yoke or all is for not..
Follow Ups: