|
|
Posted by johnd [71.125.165.187] on Saturday, March 03, 2012 at 05:38:23 :
In Reply to: Re: Six Volt Starter Dissasembly Photos posted by dave horvath [24.131.120.209] on Friday, March 02, 2012 at 23:54:37 :
Dave,
The brushes are probably welded to the field coils. if so, they can only be replaced by changing out the coils.
If you will do this work from time to time, buy one of these impact drivers:
http://www.sears.com/craftsman-impact-driver/p-00947641000P?currentProductTitle=craftsman%2dimpact%2ddriver&partNumber=00947641000P&storeId=10153&isSEOCanonURL=true&PRODUCT_TITLE_BRAND=craftsman%2dimpact%2ddriver&catalogId=12605&catgroupId=00947641000P&pageInd=product&i_cntr=1329153976044
It will allow you to remove and install field coils. For the slotted screws, use a drag link socket bit. If it is too wide to fit the heads of the screws, grind a little off the bit until it fits.
Here is a great resource for information, and parts if you enjoy fixing this stuff yourself:
http://www.waiglobal.com/starter_parts.html
Use the bill of material function. It will give you a complete list of parts.
Congratulations on not being an exchanger, but a fixer.