|
|
Posted by clueless [186.15.41.40] on Saturday, February 04, 2012 at 20:59:52 :
In Reply to: Re: OT axle spline expert question posted by Kaegi [24.16.253.154] on Saturday, February 04, 2012 at 14:26:54 :
they would tend to break at the diff rather than at the wheel end, that being the case and using the locker with fine spline you might get away with axles made with fine spline on the inner and course on the outer then just use the cups(drive flanges)from the front specially if you put locking hubs on then use those cups on the rear.
Follow Ups: