Here is how I did it.

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Will (in IL) [98.215.26.138] on Sunday, January 01, 2012 at 17:08:21 :

In Reply to: Re: Master cylinder for disc brakes posted by mark [97.123.31.58] on Sunday, January 01, 2012 at 08:01:21 :

I can provide finished pictures, but this was when fabricating and test fitting. I used the standard Dodge Slave Cylinder (mine was a 68) and mounted it at an angle to clear the floor and provide optimum force tot he clutch. The bleeder is up, and the stock clevis is connected to a bolt I cut and rounded to work as the slave's push rod.

I do have an AutoCAD R13 Drawing I made as well.

http://wawii.com/powerwagon/images/DSC06539_46PW_ClutchBracket.JPG
http://wawii.com/powerwagon/images/DSC06540_46PW_ClutchBracket.JPG
http://wawii.com/powerwagon/images/DSC06541_46PW_ClutchBracket.JPG

As always my pictures and notes are on my site (listed below).


Follow Ups:


Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com