|
|
Posted by ChrisCase [75.36.41.9] on Saturday, November 05, 2011 at 08:55:45 :
In Reply to: Just emailed my cab on chassis pics........ posted by Nick [99.100.212.49] on Saturday, November 05, 2011 at 01:03:29 :
Make sure the cab does not touch ANYTHING.
Clearance needed between frame and cab, tranny and cab, linkages, levers.... or the vibrations will come right through. Use 1/2" fender washers for shim at the cab mounts, or rubber cut from a tire sidewall. Open up a piece of red fire hose, wouldn't that look cool?
Did you notice on your frames the groove worn in where the cab at the rolled over edge surrounding the floor opening hits ? Noisy noisy noisy.
Follow Ups: