Posted by Greg Coffin on Thursday, February 15, 2001 at 7:42PM :
In Reply to: Re: rear diff interchangability? posted by Don Scott on Thursday, February 15, 2001 at 5:41PM :
The 9 5/8" differential (third member) from the WC Dodges will fit right in a Power Wagon or M37 front or rear axle. These differentials have a small set screw just above the input yoke oil seal. The 8 3/4" third members from the WCs will bolt up, but they need to be shimmed out of the axle housing 1/16" or so, otherwise you will probably break your rear axle shafts. I wouldn't recommend using the 8 3/4" third members, as they are not as strong as the 9 5/8" third members.
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |