|
|
Posted by Paul(in NY) [12.64.158.10] on Tuesday, July 05, 2011 at 19:48:23 :
In Reply to: Re: 98 dodge diesel 12v stall out after start posted by Paul(in NY) [12.64.128.8] on Tuesday, July 05, 2011 at 18:29:32 :
Another area to check after testing with a temporary fuel can;
The fuel line from the lift pump to fuel filter has a Banjo Fitting at the fuel filter.
What appears to be (2) crush washers, one on each side if the banjo fitting is actually a crush washer with a sealing material bonded around the inside diameter hole where the bolt goes thru. I had one of my engines that the sealing material
that is bonded to the crush washer, was all deteriorated. This caused a very small air leak and gave problems similar to what your reporting. The Cummins part number for those special washers is;
Washer Sealing
3918191 Qty (2)
1/2 inch
Paul
Follow Ups: