Posted by Keith in Washington [24.41.44.238] on Monday, June 13, 2011 at 14:58:59 :
In Reply to: Fuse on the ligth switch? nm posted by ChrisCase [75.36.37.239] on Monday, June 13, 2011 at 08:49:36 :
A bad fuse on light switch would take out all lights. It is the main feed point for the whole lighting system. Since you have panel lights the fuse is not bad. Look for a corroded or loose connections in your lighting circuit. Start at the light switch where each lighting circuit start. The headlights are on a separate circuit from your brake lights. Do you have running lights in the rear if so check the headlight wires especially on the frame connector block. Do you have working cowl lights? They are on the same circuit (light switch) as the rear running lights (tail lights).
Look at the wiring diagram here which should be the same as your truck. http://www.cruzinmag.com/
Follow Ups: