Posted by Bruce in BC [24.207.112.155] on Thursday, May 19, 2011 at 00:04:17 :
Rear upper lift gate frame corners on the Carryall that is . I used a putty knife to cut through some spot welds and I then elected to cut the drip rail under the hinge .
Thanks to Gordon for the advice on watching for the lead . There was a bit on one side only which I removed with a propane torch .
Some pictures here in the usual location .
http://www.powerwagonadvertiser.com/forums/showthread.php?p=88310#post88310
Follow Ups: