Posted by Vaughn on Tuesday, January 23, 2001 at 10:12PM :
In Reply to: Flathead 6 oil filter? posted by Tim on Tuesday, January 23, 2001 at 8:04PM :
You should have two fittings just above the oil pressure relief valve (3/4 to 1 inch plug just in front of the starter). A line should go from the bottom fitting to the top fitting on the cannister. A line front the top fitting should go to the fitting at the bottom of the cannister.
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |