Posted by Jeff Davis on Saturday, January 20, 2001 at 3:26AM :
In Reply to: WM300 bed installation posted by Brian Dennis on Friday, January 19, 2001 at 3:51PM :
The back of the bed is also held in place by the rear fenders.Otherwise the back of the bed is only held in place by the wood bolted to the cross frames and then to the side of the bed.Lightly tighten the front bolts and then align the box on the frame.BE SURE YOU SQUARE IT UP CAREFULLY AND AS CLOSE AS POSSIBLE.This is most important!!!!I have a 60wm300 I restored and thats what I had to do.A handy neighbor would sure have been a big help about then!!!
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |