|
|
Posted by Paul (in NY) [12.64.120.20] on Monday, May 16, 2011 at 11:51:12 :
In Reply to: Front axle bushing / axel shaft clearance posted by Matthew F [128.157.160.13] on Monday, May 16, 2011 at 10:22:38 :
The Dodge Specs on the bushing is;
New 1.519" to 1.521"
The bushing wear limit is 1.526"
Sorry I dont have Dodge Specs on the Axle Diameter at bushing area.
And use CAUTION !! After market bushings from one large vendor are out of spec, already past the wear limit. I went thru a large box of New Aftermarket bushings, at the vendor, measuring until I found 6 within spec.
I bought my last bunch, NOS from Memphis Equipment.
Paul