Posted by ChrisCase [63.199.242.72] on Saturday, March 05, 2011 at 13:51:54 :
In Reply to: Pic 2 posted by Dan Shockley [86.172.128.164] on Saturday, March 05, 2011 at 13:28:17 :
I think a plug could be made to fit in to the rear of the reverse shift rail opening. There is a flat plug in there now. New plug would have a hole in the middle, threaded to accept a NC switch. Putting tranny in reverse would slide rail slide forward, closing switch, reverse light comes on.
I made my own harness with all the necessary wires, but haven't gotten around to making the plug. I guess I ought to tool up for several. Switch would have to be gear-oil proof, with loong threaded shank for adjustment. Shouldn't be hard to find.
Follow Ups: