|
|
Posted by The Dodge Boys [64.121.152.7] on Saturday, February 19, 2011 at 21:06:34 :
In Reply to: chrysler industrial eng help. posted by junkyardog [72.224.236.56] on Saturday, February 19, 2011 at 19:33:28 :
I would try some kerosen or trans fluid. clean good as you can and fill cylinder just so it covers. Hit top of piston with hammer and 2 by 4 wood. Let it soak it might break free and give her a try. If not it only cost you a gasket and some labor. Good Luck. Bill.
Follow Ups: