|
|
Posted by daves heater [76.182.152.72] on Saturday, February 05, 2011 at 13:38:53 :
In Reply to: Seat Belt Install Question posted by gmharris [71.105.178.157] on Friday, February 04, 2011 at 23:58:40 :
Gm, I put seat belts in my ff. it is a 58 model, the holes were already there! I used 5/16 stainless steel for the anchors w/ a 3"x4" 10 gauge backing plate on the under side of the truck. double nut the anchors so as to avoid loosening. I used a set of belts from ebay, very carfully cutting the bolt on anchors from the belts and sliding them on to my preivously made SS anchors. on my truck there was a seat belt sticker on the dash, holes in the floor board behind the seat and no belts!! I could tell from the holes that there had never been belts in the truck! Dave.
Follow Ups: